APPLICATION AREA

The additive is used to ensure the performance of concrete, masonry, installation and other works, the manufacture of reinforced concrete structures at negative temperatures. The additive provides a set of initial mechanical strength and eliminates the risk of freezing of the solution mixture at low temperatures.

PERFORMANCE OF WORK

For the preparation of concrete, mortar with antifreeze additive, emulsion is added to the mixture with water per 100 kg of cement 1.0-1.5 liters of emulsion.

For preparation of glutinous mixture “Glue universal for tiles” Artisan “with antifreeze additive is dosed into 6 l of water – 120-150 ml of emulsion. Do not put concrete or mortar with additives on icy surfaces. In addition to the information above, the methods of using the material when working with it, should be guided by the current building codes and rules for the preparation of concretes and mortars in winter with the use of antifreeze additives. If in doubt about the possibility of a specific application of the material, you should independently test it or seek advice from the manufacturer.

NOTE

Work with the emulsion should be carried out at an ambient temperature of at least -5 ° C. All of the above recommendations are determined using standard Portland cement.

It is not recommended to use additives in dry building mixtures, which are used, as a rule, for the device of thin-layer coatings.

SAFETY PRECAUTIONS

When introducing emulsion into cement-containing materials, it should be remembered that at the time of hydration, an alkaline reaction occurs, so when working with such materials, it is necessary to protect eyes and skin. In case of contact with the solution in the eyes, rinse immediately with running water.

EXPIRATION DATE

In original hermetic packaging in rooms with a positive temperature of at least 12 months from the date of manufacture indicated on the package.

PACKAGING

The emulsion is packaged in 2 liters and 5 liters each.

TECHNICAL CHARACTERISTICS

Composition: special emulsion of organic and inorganic substances

Density of emulsion: 1,3 kg/m³

Appearance of the product: translucent liquid (shade allowed)

Working temperature: up to -5 ° С

Dependence of emulsion consumption on application conditions and amount of binder:

Per 100 kg of cement: 1,0-1,5 l

On a bag of a mix (25 kg) “Glue universal for tiles”TM Artisan “: 120-150 ml (6 liters of water)

PROVIDES PERFORMANCE TO WORK AT TEMPERATURE TO -5ºC

INCREASE INITIAL MECHANICAL STRENGTH

DOES NOT CORROSION

CONVENIENT IN APPLICATION

ENVIRONMENTALLY CLEAN

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.