APPLICATION

Priming paint is designed for pre-treatment of bases as a strengthening, adhesive primer before applying subsequent textured, decorative coatings. It is applied on the bases of concrete, cement-sand, cement-lime plasters, bricks, plasterboard, etc. inside and outside buildings. It is also used in the system of external warming by wet method “Artisan” before applying decorative plaster. Can be used as an independent decorative layer. The primed base has the appearance of a white rough surface.

PREPARATION OF THE SURFACE

Preparation of the base is carried out, according to СНиП 3.04.01-87  and ДБН В.2.6-22-2001. The substrate must be dry, clean, without visible damage. Loose, unstable, porous surfaces are removed mechanically, aligned.

PERFORMANCE OF WORK

Stir well before use. The paint should be applied to the surface with a paint brush (do not apply with a roller). The work should be carried out at the temperature of the base from +5 to +30 ºС. Under normal climatic conditions (temperature +20 ° C and relative humidity 60%), the drying time is 4 hours. During application, as well as drying, freshly painted surfaces must be protected from rain, strong wind and direct sunlight until completely dry. Immediately after use, the instruments should be rinsed thoroughly with water, if necessary, cleaned with an organic solvent.

ATTENTION! Do not freeze the product. The manufacturer is not responsible for the incorrect use of the material, as well as for its use for purposes and conditions not provided for by the instruction.

SAFETY PRECAUTIONS

Do not apply primer paint to skin and mucous surfaces. It is advisable to work in rubber gloves. In case of contact with skin or eyes, rinse thoroughly with water.

EXPIRATION DATE

In original hermetic packaging and in cool conditions (not below +5 ° C and not above +30 ° C) 12 months from the date of manufacture indicated on the package. Avoid freezing.

PACKAGING

The paint is packed in plastic buckets of 7.5 and 15 kg.

UTILIZATION

Unused residues should be allowed to dry and disposed of with household rubbish.

TECHNICAL CHARACTERISTICS

Composition: mixture of pigments and fillers in aqueous polymer dispersions

Drying time, hour.: from 3 to 6

Appearance of the painted surface: matt milky white

Density :  1,58 – 1,65 kg / l

Application temperature :  from +5 °С to +30 °С

Consumption, kg / m2 : 0,35  – 0,4

POLYMER

STRENGTHENS WEAK SURFACES

INCREASES ADHESION TO VARIOUS BASES

HIGH COATING CAPACITY

VAPOR-PERMEABLE

WATERPROOF

ECOLOGICALY CLEAN

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.

PROPERTIES

Environmentally safe, with a neutral smell, fire and explosion safety. Creates a sufficiently strong coating after drying. If necessary, you can update the painted surface from time to time without eroding it. It has excellent adhesion to any surfaces, taking into account the use of the appropriate primers. It is covered with water pigments.

APPLICATION

The paint is intended for painting walls and ceilings inside residential premises – as a final coating on mineral surfaces (concrete, cement-sand, lime, cement-lime, gypsum plasters), as well as plasterboard, gypsum-fibrous boards. The paint is used for painting decorative mineral and acrylic plasters.

PREPARATION OF THE SURFACE

Preparation of the base is carried out, according to СНиП 3.04.01-87 and ДБН В.2.6-22-2001. The substrate must be dry and strong enough without visible damage. The surface must be cleaned of various kinds of contaminants and other substances that reduce the adhesion of the paint to the substrate (dust, dirt, grease, fragile paint coatings, chalky whitewash) and treat with primer of TM “Artisan No. 7” or “Artisan No. 8”. Unstable, loose areas should be removed and aligned. The areas of the surface affected by the fungus should be brushed and treated with a fungicidal preparation.

PERFORMANCE OF WORK

The paint before use should be mixed thoroughly. The paint is applied with a brush, roller or paint sprayer. Work should be carried out at base temperature not lower than +5 ° С and not higher than +30 ° С. If necessary, the paint can be diluted with clean water (no more than 10%). Immediately after use, the instruments should be rinsed with water, if necessary, cleaned with an organic solvent.

DRYING TIME

Under normal climatic conditions (temperature +20 ° C and relative humidity 60%) the drying time of the paint is about 4 hours

EXPIRATION DATE

In original hermetic packaging and in cool conditions (not below +5 ° C and not above +30 ° C) 12 months from the date of manufacture indicated on the package. Avoid freezing.

PACKAGING

The paint is packed in plastic buckets of 7.5 and 15 kg.

UTILIZATION

Unused residues should be allowed to dry and disposed of with household rubbish.

TECHNICAL CHARACTERISTICS

Composition: mixture of pigments and fillers in aqueous polymer dispersions

Drying time, hour.: from 3 to 6

Appearance of the painted surface: matt milky white

Density :  about 1,5 kg / l

Application temperature :  from +5 °С to +30 °С

Consumption, kg / m2 : 0,15  – 0,25

RESISTANT TO WASHING

CONVENIENT IN APPLICATION

HIGH WHITENESS

GOOD ADHESION

VAPOR-PERMEABLE

ECONOMIC

ECOLOGICALY CLEAN

DOES NOT BURN

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.

PROPERTIES

Environmentally safe, with a neutral smell, fire and explosion safety. Creates a sufficiently strong coating after drying. If necessary, you can update the painted surface from time to time without eroding it. It has excellent adhesion to any surfaces, taking into account the use of the appropriate primers. It is covered with water pigments.

APPLICATION

The paint is intended for painting walls and ceilings inside residential premises – as a final coating on mineral surfaces (concrete, cement-sand, lime, cement-lime, gypsum plasters), as well as plasterboard, gypsum-fibrous boards. The paint is used for painting decorative mineral and acrylic plasters.

PREPARATION OF THE SURFACE

Preparation of the base is carried out, according to СНиП 3.04.01-87 and ДБН В.2.6-22-2001. The substrate must be dry and strong enough without visible damage. The surface must be cleaned of various kinds of contaminants and other substances that reduce the adhesion of the paint to the substrate (dust, dirt, grease, fragile paint coatings, chalky whitewash) and treat with primer of TM “Artisan No. 7” or “Artisan No. 8”. Unstable, loose areas should be removed and aligned. The areas of the surface affected by the fungus should be brushed and treated with a fungicidal preparation.

PERFORMANCE OF WORK

The paint before use should be mixed thoroughly. The paint is applied with a brush, roller or paint sprayer. Work should be carried out at base temperature not lower than +5 ° С and not higher than +30 ° С. If necessary, the paint can be diluted with clean water (no more than 10%). Immediately after use, the instruments should be rinsed with water, if necessary, cleaned with an organic solvent.

DRYING TIME

Under normal climatic conditions (temperature +20 ° C and relative humidity 60%) the drying time of the paint is about 4 hours, depending on the surface.

EXPIRATION DATE

In original hermetic packaging and in cool conditions (not below +5 ° C and not above +25 ° C) 12 months from the date of manufacture indicated on the package. Avoid freezing.

PACKAGING

The paint is packed in plastic buckets of 7.5 and 15 kg.

UTILIZATION

Unused residues should be allowed to dry and disposed of with household rubbish.

TECHNICAL CHARACTERISTICS

Composition: mixture of pigments and fillers in aqueous polymer dispersions

Drying time, hour.: from 3 to 6

Appearance of the painted surface: matt milky white

Density :  about 1,5 kg / l

Application temperature :  from +5 °С to +30 °С

Consumption, kg / m2 : 0,15  – 0,25

CONVENIENT IN APPLICATION

HIGH WHITENESS

GOOD ADHESION

VAPOR-PERMEABLE

ECONOMIC

ECOLOGICALY CLEAN

DOES NOT BURN

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.

and internal works, resistant to weathering

PROPERTIES

White, matte with high opacity and adhesion to mineral and organic surfaces, moisture resistant, environmentally friendly, vapor-permeable, UV-resistant, neutral odor. Resistant to atmospheric precipitation and temperature changes. Fire and explosion proof. Pigmented by water pigments.

APPLICATION

Designed for finishing the surface of building structures and elements inside and outside buildings. Outside buildings – on mineral grounds (concrete, brick, cement-sand plasters). Inside the premises – both on mineral and organic bases (wallpaper, plywood, fiberboard, particle board, gypsum board, plaster). The paint is also used to update the aesthetic properties of decorative plasters.

PREPARATION OF THE SURFACE

Preparation of the base is carried out, according to СНиП 3.04.01-87 and  ДБН В.2.6-22-2001. The substrate must be dry and strong, without visible damage. The old paint should be removed mechanically, the surface cleaned and treated with a primer. Friable unstable surfaces should be removed, if necessary, plastered and primed.

PERFORMANCE OF WORK

The paint before use should be mixed thoroughly. The paint is applied with a brush, roller or paint sprayer. Work should be carried out at base temperature not lower than +5 ° С and not higher than +30 ° С. If necessary, the paint can be diluted with clean water (no more than 10%). Under normal climatic conditions (temperature +20 ° C and relative humidity 60%), the drying time is 4 hours. During application, as well as drying, freshly painted surfaces must be protected from rain, strong wind and direct sunlight until completely dry. Immediately after use, the instruments should be rinsed thoroughly with water, if necessary, cleaned with an organic solvent.

EXPIRATION DATE

In original hermetic packaging and in cool conditions (not below +5 ° C and not above +30 ° C) 12 months from the date of manufacture indicated on the package. Avoid freezing.

PACKAGING

The paint is packed in plastic buckets of 7.5 and 15 kg.

UTILIZATION

Unused residues should be allowed to dry and disposed of with household rubbish.

TECHNICAL CHARACTERISTICS

Composition: mixture of pigments and fillers in aqueous polymer dispersions

Drying time, hour.: from 3 to 6

Appearance of the painted surface: matt milky white

Density :  about 1,5 kg / l

Application temperature :  from +5 °С to +30 °С

Consumption, kg / m2 : 0,15  – 0,25

CONVENIENT IN APPLICATION

RESISTANT TO WASHING

CONVENIENT IN APPLICATION

HIGH WHITENESS

GOOD ADHESION

VAPOR-PERMEABLE

ECONOMIC

ECOLOGICALY CLEAN

DOES NOT BURN

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.

PERFORMANCE OF WORK

With the primer cover a dense, load-bearing, dry, hygroscopic bases, cleaned of impurities. Dilute the soil concentrate in a ratio of 1 to 6 with clean water and mix thoroughly by hand, or by drill with a nozzle at low speed. The resulting solution is applied by a paint brush with a uniform layer, a special product formula allows the surface to be treated in a single layer. Drying time of the dispersion on the basis of 4 hours, at a temperature of 20 ° C.

SAFETY PRECAUTIONS

It is necessary to avoid getting the dispersion on the skin and mucous surfaces. It is advisable to work in rubber gloves. In case of dispersion on the skin or eyes, they must be thoroughly rinsed.

EXPIRATION DATE

In a sealed container in a cool place for up to 12 months. Protect from frost.

PACKAGING

Dispersion is packaged in 2, 5, 10 liters.

TECHNICAL CHARACTERISTICS

Composition: acryl-styrene dispersion

Color:  milky white liquid

Density           : 1040  kg/m³

Temperature of execution of works:  from +10 to +30 °С

Consumption:  from 0,1  to 0,2  l/m²

ECONOMICAL

VAPOR-PERMEABLE

ECOLOGICALLY CLEAN

HYDROPHOBIZATED

INCREASES ADHESION OF NEXT LAYERS

STRENGTHENS AND PROSPECTS THE FOUNDATION

TABLE

Foundation	Proportion of breeding, parts	Quantity of the mortar, liters	Coverage area, sq.m.
Weakly absorbing (concrete)	1:9	20	100
Normally absorbent (plaster, GKL)	1:8	18	90
Powder-absorbing (foam-aerated concrete)	1:6	14	70

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine

]]> https://artisan.ua/product/primer-concentrate-N-16/feed/ 0 https://artisan.ua/product/protective-impregnation-N14-antifungus/ https://artisan.ua/product/protective-impregnation-N14-antifungus/#respond Sat, 11 Nov 2017 12:41:34 +0000 https://artisan.ua/?post_type=product&p=507 Protective impregnation №14 “Antifungus” deep penetrating disinfectant fungicide]]> Protective impregnation №14 “Antifungus” deep penetrating disinfectant fungicide

APPLICATION

Universal ecologically safe, disinfectant with high antimicrobial activity in relation to a wide class of microorganisms: bacteria, viruses, mold fungi, microalgae, yeast, spore forms of microorganisms. For antifungal and biocidal protection of all types of surfaces of building structures inside and outside buildings and structures. The composition contains 1% of the active substance and is ready for use.

PERFORMANCE OF WORK

The surface of the material to be treated must be dry, free from dust, dirt, oil, grease, paint. Antifungal impregnation processes the surfaces before applying primers or paints. The surface of the wood is treated with a 1% solution (according to the active substance) at a flow rate of 100-200 ml per 1 m² of surface. Impregnation “Antifungus” can be applied with a roller, brush, paint sprayer. Drying time of 1 layer is about 20-30 minutes under normal climatic conditions (temperature +20 ° С and relative humidity 60%). The next layer can be applied without waiting for the previous one to dry (in 5-10 minutes). When using impregnation “Antifungus” in concrete, mortars, plasters, an aqueous impregnation solution is prepared in a ratio of 1: 1 and is used as mixing water for the dry mixture.

SAFETY PRECAUTIONS

Impregnation “Antifungus” is safe for human health and the environment, fire and explosion-proof. In case of contact with skin and eyes, rinse with clean running water.

EXPIRATION DATE

Can be stored in a hermetically sealed container for up to 12 months at a temperature of at least 0 ° C. Protect from freezing.

PACKAGING

Impregnation “Antifungus” is supplied in a ready to use 1% solution in a container of 0.5, 1 and 5 liters.

TECHNICAL CHARACTERISTICS

Composition:  aqueous emulsion of polymeric chemical fillers and biocides

Color: slightly turbid clear liquid

Working temperature: from +5 to +40°С

Consumption:  from  0,1 to 0,2 l/m²

HAS DEEP PENETRATION ACTION

WATER DILUTED

ELIMINATES FUNGI, MICROORGANISMS, BACTERIA AND PREVENTS THEIR APPEARANCE

PROTECTS NEW BASES FROM THE APPEARANCE AGAINST MOLD

VAPOR-PERMEABLE

ECOLOGICALY CLEAN

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.

APPLICATION AREA

The additive is used to ensure the performance of concrete, masonry, installation and other works, the manufacture of reinforced concrete structures at negative temperatures. The additive provides a set of initial mechanical strength and eliminates the risk of freezing of the solution mixture at low temperatures.

PERFORMANCE OF WORK

For the preparation of concrete, mortar with antifreeze additive, emulsion is added to the mixture with water per 100 kg of cement 1.0-1.5 liters of emulsion.

For preparation of glutinous mixture “Glue universal for tiles” Artisan “with antifreeze additive is dosed into 6 l of water – 120-150 ml of emulsion. Do not put concrete or mortar with additives on icy surfaces. In addition to the information above, the methods of using the material when working with it, should be guided by the current building codes and rules for the preparation of concretes and mortars in winter with the use of antifreeze additives. If in doubt about the possibility of a specific application of the material, you should independently test it or seek advice from the manufacturer.

NOTE

Work with the emulsion should be carried out at an ambient temperature of at least -5 ° C. All of the above recommendations are determined using standard Portland cement.

It is not recommended to use additives in dry building mixtures, which are used, as a rule, for the device of thin-layer coatings.

SAFETY PRECAUTIONS

When introducing emulsion into cement-containing materials, it should be remembered that at the time of hydration, an alkaline reaction occurs, so when working with such materials, it is necessary to protect eyes and skin. In case of contact with the solution in the eyes, rinse immediately with running water.

EXPIRATION DATE

In original hermetic packaging in rooms with a positive temperature of at least 12 months from the date of manufacture indicated on the package.

PACKAGING

The emulsion is packaged in 2 liters and 5 liters each.

TECHNICAL CHARACTERISTICS

Composition: special emulsion of organic and inorganic substances

Density of emulsion: 1,3 kg/m³

Appearance of the product: translucent liquid (shade allowed)

Working temperature: up to -5 ° С

Dependence of emulsion consumption on application conditions and amount of binder:

Per 100 kg of cement: 1,0-1,5 l

On a bag of a mix (25 kg) “Glue universal for tiles”TM Artisan “: 120-150 ml (6 liters of water)

PROVIDES PERFORMANCE TO WORK AT TEMPERATURE TO -5ºC

INCREASE INITIAL MECHANICAL STRENGTH

DOES NOT CORROSION

CONVENIENT IN APPLICATION

ENVIRONMENTALLY CLEAN

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.

APPLICATION

The waterproofing emulsion is used in conjunction with cement-sand “Artisan-С83” mixture for the construction of elastic waterproofing coatings on mineral substrates, is used on deformable and non-deformable, horizontal and vertical bases, with internal and external works in civil and industrial construction.

PREPARATION OF THE SURFACE

Preparation of the base is carried out, according to СНиП 3.04.01-87 and ДБН В.2.6-22-2001. The base must be dense, strong, even, without visible damage. There should be no salt deposits on the surface. Waterproofing mixture is applied to the previously primed surface (concrete, cement-sand mixture, brickwork) after 28 days of strength of this base.

PERFORMANCE OF WORK

For the preparation of the mortar mixture, the dry part (cement-sand mixture Artisan-C83) is mixed with the dispersion (not diluted with water) per 1 kg of a mixture of 0.32-0.35 L of the dispersion and mixed intensively with a stirrer or low-speed drill (400-800 rpm) to obtain a homogeneous mass without lumps. Leave the solution for 5-10 minutes, then mix again. The solution should be consumed within 1 hour. Waterproofing is applied for two, and if necessary, and for 3 working passes. The first layer is applied with a brush on a damp base. The application of the next layer must be perpendicular to the previous one. Each subsequent layer is applied to the already hardened, but not yet dried, previous layer. Fresh coating for 3 days should be protected from too rapid drying. During the curing period, the coating should be protected from direct sunlight, drafts, rain and frost.

EXPIRATION DATE

In original hermetic packaging and in cool conditions (not lower than +5 ° C and not higher than +35 ° C) 12 months from the date of manufacture indicated on the package. Avoid freezing.

PACKAGING

Dispersion is packaged in plastic containers of 10 liters.

                                                                                     UTILIZATION

Unused residues should be allowed to dry and disposed of with household rubbish.

TECHNICAL CHARACTERISTICS

Composition:  special polymer dispersion

Color: milky white

Density: around  1,04 kg/l

Working temperature: from +5 to +30°С

Consumption:  from 0.45 to 0.6 l / kg of the mixture

ELASTIC

WATERPROOF

LONG-TERM

STRONG

SUSTAINABLE TO ATMOSPHERIC AGING

ENVIRONMENTALLY SAFE

FIT FOR INTERNAL AND EXTERNAL WORKS

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.

APPLICATION

Emulsion is used as an additive while mixing dry mixtures with water to give chemical solutions after hardening (against acids, alkalis, fats, etc.).

Typical applications:

• at the enterprises of the food industry (dairies, breweries, canneries, distilleries);
• in baths and saunas;
• in containers containing aggressive substances;
• treatment facilities.

PERFORMANCE OF WORK

While stirring the dry mixture with water, approximately 250-300 ml of emulsion per 1 l of water is added to the water when kneaded. The mixture is thoroughly mixed, preferably mechanically. The emulsion can be used in the preparation of plasters of various types, glues for tiles, grouts, various floors. The manufacturer is not responsible for improper use of the material, as well as its application in order and conditions not stipulated by the instruction.

SAFETY PRECAUTIONS

Work with the additive in protective gloves, if it gets on the body, rinse with water.

EXPIRATION DATE

In a sealed container in a cool place for up to 12 months. Protect from frost.

PACKAGING

Dispersion is packaged in 5, 10 liters.

TECHNICAL CHARACTERISTICS

Composition: styrene-butadiene dispersion

Dry polymer:  51%

pH:  7,5

Appearance:  milky white liquid

Density: around  1,02 kg/l

Diameter of particles: 0.16 MKM

Consumption: 0,25 l per 1 liter of water

Application temperature: more than 20 ° С

EFFECTIVE

UNIVERSAL

IMPROVES ELASTICITY

ECONOMIC

CONVENIENT IN APPLICATION

DOES NOT BURN

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.

APPLICATION

 Primer uses for pre-treatment not absorbent bases (monolithic concrete, massive concrete coatings, polished concrete mounting blocks, sand-lime brick, etc.) and foundations with high water absorption (cellular concrete, etc.) before applying gypsum, lime, lime-cement, cement and other plasters, adhesives compositions, as well as before applying gypsum boards. Used as adhesive and reinforcing primers. Can also be used in the system of external insulation wet sanded before applying the decorative plaster.

PREPARATION OF THE SURFACE

Substrate preparation is carried out according to normative documents. With primer “Betoncontact” are covered dense, dry, clean grounds, cleaned of dust, dirt, grease, and loose elements. Loose, flaking surfaces are removed with a brush.

PERFORMANCE OF WORK

Tool is ready to use. Before applying necessarily stir. Primer “Betoncontact” applies on the surface using a paint brush. Under normal climatic conditions  (temperature +20 °С and relative humidity 60%) drying time of primer on the basics – from 3 to 6 hours, very thick base withstands up to two days. Work should be carried out at temperature of base from +5 to +30 °С.

 ATTENTION! Freezing of the product is not allowed. The manufacturer is not responsible for incorrect material use, and also, for use of it for purposes and conditions not set in the instruction.

SAFETY PRECAUTIONS

You should avoid getting a primer on the skin and mucous membranes. You must work in rubber gloves. In case of contact with skin and eyes, you must wash out it thoroughly with running water.

EXPIRATION DATE

In brand sealed packaging in cool conditions (not lower +5 °С and not higher +30 °С) 12 months from the date of manufacture indicated on the package.

PACKAGING

The product is packaged per 3, 7,5 and 15 kg.

TECHNICAL CHARACTERISTICS

Composition: a mixture of pigments and fillers in water polymer dispersions

Drying time: from 3 to 6 hours

Color:  light beige

Density                : about 1,59 kg/l

Temperature of execution of works:  from +5 to +30 °С

Consumption:  from 0,25 to 0,5 kg/m²

FOR SMOOTH FOUNDATIONS:

• MONOLITHIC CONCRETE
• GLASS
• CERAMIC TILES

FOR STRONGLY ABSORBING FOUNDATIONS:

• FOAM CONCRETE
• WOODEN FOUNDATIONS
• SILICATE AND CERAMIC BRICK

ТУ У В.2.7-24.3-30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine