APPLICATION

It is used to remove paint and varnish from metal and wooden surfaces painted with pentophthalic, nitrocellulose, melamine and other alkyd, oil enamels, paints and primers.

PERFORMANCE OF WORK

The remover should be applied to the base with a brush brush with a layer of 0.5-1 mm and allowed to stand for 15 minutes. After the destruction (swelling) of the upper layer, the detachment is removed with a spatula. If necessary, the wash is repeated. To achieve a more effective cleansing, the surface is covered with a polyethylene film, aged for the required time and the formed layer is removed. In connection with the variety of paintwork materials, surface conditions and working conditions, it is recommended to perform trial applications in invisible places.

The manufacturer is not responsible for improper use of the material, as well as its application in order and conditions not stipulated by the instruction.

SAFETY PRECAUTIONS

Remover is a flammable liquid with a characteristic odor. Toxic. Work should be carried out in a well-ventilated area in protective gloves, avoid contact with skin and mucous membranes.

EXPIRATION DATE

In sealed packaging – 12 months. Keep away from heaters, protect from direct sunlight. Keep away from children.

PACKAGING

The remover is packaged in 1 liter.

TECHNICAL CHARACTERISTICS

Composition: methylene chloride, active solvents and special additives.

Appearance:  viscous, unclear, homogeneous liquid grayish-white

Density:  1,1 kg/l

Consumption:  from 300 g / m2 to 1000 g / m2

EFFECTIVE

CONVENIENT IN APPLICATION

ECONOMIC

READY FOR USE

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.

APPLICATION

Remover is used to clean mineral surfaces from various types of contaminants: lime, fading, salt deposits (efflorescence). It is applied to the material, absorbed into it by capillaries and forms a vapor-permeable, colorless, water-repellent film.

– Low molecular weight of oligomers ensures high penetrating ability;

– the structure of the molecules makes it possible to use it for building materials with a high content of alkali;

– provides a rapid manifestation of hydrophobic effect, due to which the treated surface quickly becomes resistant to the effects of atmospheric precipitation;

– increases frost resistance.

PREPARATION OF THE SURFACE

The surface must be dry. Pollution should be previously eliminated mechanically. In the presence of salts harmful to the construction, it is necessary to make a qualitative analysis of their content. Those areas that are supposed to be treated must have open pores. Surfaces that will not be treated (windows lacquered and intended for painting) must be protected. Materials sensitive to the solvent, such as insulation from polystyrene, mastic for seams, bitumen, latex, etc. do not have to contact the composition.

PERFORMANCE OF WORK

For different types of surfaces, use the table.

Shake before use. Apply the material by spraying or brushing. Application is carried out evenly and to saturation for one or more working approaches. As a rule, it is enough to process the surface of a building material twice, while the washing should be applied by the method “wet on wet”. The highest efficiency is achieved with a well-absorbent surface. Clean tools immediately after use with solvents of the 646-650 series.

All recommendations are effective at a temperature of + 20 ° C and a relative humidity of 60%.

The manufacturer is not responsible for the misuse of the material.

SAFETY PRECAUTIONS

Work should be done away from open sources of fire. Do not drink, smoke or eat while working. Mandatory use of protective glasses and gloves. In case of contact with the skin and eyes, rinse thoroughly with water and, if necessary, consult a doctor. Ensure good ventilation in enclosed spaces. Do not turn.

Keep away from open flame in accordance with fire safety regulations.

EXPIRATION DATE

In hermetically sealed packaging 24 months.

PACKAGING

Containers of 0.9 liters and 2.7 liters.

TECHNICAL CHARACTERISTICS

Composition:  oligomeric siloxane with a long alkyd substituent

Density : 0.78 g / cm3

Color :  slightly clear liquid

Application temperature :  from 0 °С to +40 °С

Consumption:

Concrete B25 : 150-200 ml / m2

Facing bricks :   150-250 ml / m2

Dry mix plasters : 200-250 ml / m2

Lime-sand plaster :  300-600 ml / m2

Asbestos cement (slate) : 150-200 ml / m2

Cellular concrete :  300-800 ml / m2

It is recommended to make control samples to assess the flow and efficiency of the material.

TABLE

HIGH EFFICIENCY

UNIVERSAL

FROST-RESISTANT

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.