APPLICATION

The composition is used to protect non-glazed ceramic surfaces with seams of any type and tiles made of natural and artificial stone loose structure and other building elements indoors, from rust, fading, dirt, water. Much easier to care for the lined surfaces, enhances the brightness of colors. Due to its good penetrating ability, it forms a reliable protective layer on the treated surface, which after complete drying is not washed off with water and withstands the action of various detergents.

PREPARATION OF THE SURFACE

Preparation of the base is carried out, according to СНиП 3.04.01-87 and ДБН В.2.6-22-2001. The substrate must be dry and strong, without visible damage. Unstable, loose areas of the surface of the substrate should be removed mechanically.

!! Do not use on surfaces that are not reliably isolated from groundwater.

PERFORMANCE OF WORK

The liquid “Protection for facing No. 1” is ready for use. It is applied to the surface with a brush. Do not pour “Protection for facing No. 1” directly on the surface. The liquid “Protection for lining No. 1” should be distributed evenly throughout the surface to be treated and left for a few minutes for better absorption and the formation of a quality protective layer. Remove residual liquid with a cloth and, if necessary, treat the surface again. Apply 2-3 layers of protection to the highly absorbent base. Fundamentals that have a small absorbent capacity are treated with a soft cloth to prevent the formation of a non-uniform protective layer on the surface.

!! Walking on the floor can be done 24 hours after the treatment “Protection for facing # 1”.

!! The seams are treated with a thin brush 2 weeks after the jointing works.

The manufacturer is not responsible for improper use of the material, as well as its application in order and conditions not stipulated by the instruction.

SAFETY PRECAUTIONS

Avoid contact with skin and mucous membranes. It is advisable to work in rubber gloves. In case of contact with the skin and eyes, rinse thoroughly with running water.

EXPIRATION DATE

In a sealed container – up to 12 months. Protect from frost.

PACKAGING

The liquid is packaged in 0.5 and 1 liter.

TECHNICAL CHARACTERISTICS

Composition: aqueous polymer dispersion with special additives

Drying time:  from 3 to 6 hours

Appearance:  milky-white liquid

Density:  about 1 kg / l

Working temperature:  from +5 to +30

Consumption:   from 0,1 to 0,25 l / m²

WATERPROOFING

OBSTACLE TO SURFACE POLLUTION

HAS A MUCH DEPTH OF PENETRATION

RESISTANT TO ALKALIS

VAPOR-PERMEABLE

ENVIRONMENTALLY PURE

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.