Betoncontact №15

Betoncontact  №15 primer with quartz filler  increases the adhesion to the foundation

APPLICATION

 Primer uses for pre-treatment not absorbent bases (monolithic concrete, massive concrete coatings, polished concrete mounting blocks, sand-lime brick, etc.) and foundations with high water absorption (cellular concrete, etc.) before applying gypsum, lime, lime-cement, cement and other plasters, adhesives compositions, as well as before applying gypsum boards. Used as adhesive and reinforcing primers. Can also be used in the system of external insulation wet sanded before applying the decorative plaster.

PREPARATION OF THE SURFACE

Substrate preparation is carried out according to normative documents. With primer “Betoncontact” are covered dense, dry, clean grounds, cleaned of dust, dirt, grease, and loose elements. Loose, flaking surfaces are removed with a brush.

PERFORMANCE OF WORK

Tool is ready to use. Before applying necessarily stir. Primer “Betoncontact” applies on the surface using a paint brush. Under normal climatic conditions  (temperature +20 °С and relative humidity 60%) drying time of primer on the basics – from 3 to 6 hours, very thick base withstands up to two days. Work should be carried out at temperature of base from +5 to +30 °С.

 ATTENTION! Freezing of the product is not allowed. The manufacturer is not responsible for incorrect material use, and also, for use of it for purposes and conditions not set in the instruction.

SAFETY PRECAUTIONS

You should avoid getting a primer on the skin and mucous membranes. You must work in rubber gloves. In case of contact with skin and eyes, you must wash out it thoroughly with running water.

EXPIRATION DATE

In brand sealed packaging in cool conditions (not lower +5 °С and not higher +30 °С) 12 months from the date of manufacture indicated on the package.

PACKAGING

The product is packaged per 3, 7,5 and 15 kg.

TECHNICAL CHARACTERISTICS

Composition: a mixture of pigments and fillers in water polymer dispersions

Drying time: from 3 to 6 hours

Color:  light beige

Density                : about 1,59 kg/l

Temperature of execution of works:  from +5 to +30 °С

Consumption:  from 0,25 to 0,5 kg/m²

FOR SMOOTH FOUNDATIONS:

• MONOLITHIC CONCRETE
• GLASS
• CERAMIC TILES

FOR STRONGLY ABSORBING FOUNDATIONS:

• FOAM CONCRETE
• WOODEN FOUNDATIONS
• SILICATE AND CERAMIC BRICK

ТУ У В.2.7-24.3-30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine