Interior paint F1

Interior paint F1 water-dispersed paint, matt for interior works

PROPERTIES

Environmentally safe, with a neutral smell, fire and explosion safety. Creates a sufficiently strong coating after drying. If necessary, you can update the painted surface from time to time without eroding it. It has excellent adhesion to any surfaces, taking into account the use of the appropriate primers. It is covered with water pigments.

APPLICATION

The paint is intended for painting walls and ceilings inside residential premises – as a final coating on mineral surfaces (concrete, cement-sand, lime, cement-lime, gypsum plasters), as well as plasterboard, gypsum-fibrous boards. The paint is used for painting decorative mineral and acrylic plasters.

PREPARATION OF THE SURFACE

Preparation of the base is carried out, according to СНиП 3.04.01-87 and ДБН В.2.6-22-2001. The substrate must be dry and strong enough without visible damage. The surface must be cleaned of various kinds of contaminants and other substances that reduce the adhesion of the paint to the substrate (dust, dirt, grease, fragile paint coatings, chalky whitewash) and treat with primer of TM “Artisan No. 7” or “Artisan No. 8”. Unstable, loose areas should be removed and aligned. The areas of the surface affected by the fungus should be brushed and treated with a fungicidal preparation.

PERFORMANCE OF WORK

The paint before use should be mixed thoroughly. The paint is applied with a brush, roller or paint sprayer. Work should be carried out at base temperature not lower than +5 ° С and not higher than +30 ° С. If necessary, the paint can be diluted with clean water (no more than 10%). Immediately after use, the instruments should be rinsed with water, if necessary, cleaned with an organic solvent.

DRYING TIME

Under normal climatic conditions (temperature +20 ° C and relative humidity 60%) the drying time of the paint is about 4 hours, depending on the surface.

EXPIRATION DATE

In original hermetic packaging and in cool conditions (not below +5 ° C and not above +25 ° C) 12 months from the date of manufacture indicated on the package. Avoid freezing.

PACKAGING

The paint is packed in plastic buckets of 7.5 and 15 kg.

UTILIZATION

Unused residues should be allowed to dry and disposed of with household rubbish.

TECHNICAL CHARACTERISTICS

Composition: mixture of pigments and fillers in aqueous polymer dispersions

Drying time, hour.: from 3 to 6

Appearance of the painted surface: matt milky white

Density :  about 1,5 kg / l

Application temperature :  from +5 °С to +30 °С

Consumption, kg / m2 : 0,15  – 0,25

 

CONVENIENT IN APPLICATION

HIGH WHITENESS

GOOD ADHESION

VAPOR-PERMEABLE

ECONOMIC

ECOLOGICALY CLEAN

DOES NOT BURN

 

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.