Adhesive mixture universal C-11 – for fixing ceramic or stone tiles on the floor inside and outside buildings
The mixture is used for gluing ceramic or stone tiles with a size of no more than 30 x 30 cm inside or outside the buildings.
PREPARATION OF THE SURFACE
The substrate should be smooth, dry, durable, free from grease, old paints and other materials that reduce adhesion. The loose rather weak layer must be removed. Before applying the mortar mixture, the base has been treat with primer No. 7 or, if necessary, with primer No. 8 of the trade mark “Artisan”.
PERFORMANCE OF WORK
!! Do not wet the tiles.
The dry mixture is mixed manually or mechanically with clean water until a uniform consistency is obtained. Leave the mixture for 3-5 minutes, then mix again. The mortar mixture is applied to the prepared base with the even side of the notched trowel, then the tooth side is spread over the surface. At one go, should be used such an amount of mortar to glue the tiles in 20 minutes. The tiles are laid on the mortar and easily pressed against the base. After 48 hours, the surface is ready for technological displacement, you can fill the seams with a fugue.
When carrying out the construction work, it is necessary to be guided by the current building norms and rules. The manufacturer is not responsible for the misuse of the material, nor for its use for purposes and conditions.
The mixture contains cement, which when combined with water forms alkali. It is necessary to prevent the hitting impregnation on the skin and mucous membranes. All work should be carried out in goggles, rubber gloves and protective clothing. Provide fresh air. In case of contact with skin or eyes, rinse thoroughly with water and if necessary, consult a doctor.
In dry conditions and hermetic packaging the period of storage is at least 12 months from the date of manufacture.
The dry mix is packaged in bags of 5kg and 25 kg.
Composition: a mixture of white cement with mineral fillers and special additives
Quantity of water for solution preparation, l / kg : 0,18-0,22
Time of use, min, not less than: 60
Open time, min, not less than: 20
Correction time, min, not less than: 10
Strength of adhesion to the base, MPa, not less than: 0,8
Temperature of use, ° С: from +10 to +30
Maximum layer thickness, mm: 10
Consumption, kg / m2 / mm: from 2 to 4,5
FOR GLUING CERAMIS TILES WITH DIMENSIONS NOT EXCEEDING 30*30 CM.
DO NOT HAVE SHRINKAGE
EASY TO USE
Mixture “Artisan” C.1.RSH1
DSTU B В.2.7-126: 2011
Hygienic conclusion of the Ministry of Health of Ukraine