Emulsion Waterproofing №11 to impart to the solutions waterproofing properties
The waterproofing emulsion is used in conjunction with cement-sand “Artisan-С83” mixture for the construction of elastic waterproofing coatings on mineral substrates, is used on deformable and non-deformable, horizontal and vertical bases, with internal and external works in civil and industrial construction.
PREPARATION OF THE SURFACE
Preparation of the base is carried out, according to СНиП 3.04.01-87 and ДБН В.2.6-22-2001. The base must be dense, strong, even, without visible damage. There should be no salt deposits on the surface. Waterproofing mixture is applied to the previously primed surface (concrete, cement-sand mixture, brickwork) after 28 days of strength of this base.
PERFORMANCE OF WORK
For the preparation of the mortar mixture, the dry part (cement-sand mixture Artisan-C83) is mixed with the dispersion (not diluted with water) per 1 kg of a mixture of 0.32-0.35 L of the dispersion and mixed intensively with a stirrer or low-speed drill (400-800 rpm) to obtain a homogeneous mass without lumps. Leave the solution for 5-10 minutes, then mix again. The solution should be consumed within 1 hour. Waterproofing is applied for two, and if necessary, and for 3 working passes. The first layer is applied with a brush on a damp base. The application of the next layer must be perpendicular to the previous one. Each subsequent layer is applied to the already hardened, but not yet dried, previous layer. Fresh coating for 3 days should be protected from too rapid drying. During the curing period, the coating should be protected from direct sunlight, drafts, rain and frost.
In original hermetic packaging and in cool conditions (not lower than +5 ° C and not higher than +35 ° C) 12 months from the date of manufacture indicated on the package. Avoid freezing.
Dispersion is packaged in plastic containers of 10 liters.
Unused residues should be allowed to dry and disposed of with household rubbish.
Composition: special polymer dispersion
Color: milky white
Density: around 1,04 kg/l
Working temperature: from +5 to +30°С
Consumption: from 0.45 to 0.6 l / kg of the mixture
SUSTAINABLE TO ATMOSPHERIC AGING
FIT FOR INTERNAL AND EXTERNAL WORKS
ТУ У В.2.7-24.3–30554583-004-2002
Hygienic conclusion of the Ministry of Health of Ukraine.