Facade paint F8

Facade paint F8 water-dispersive paint, acrylic-styrene, matte for outdoor

and internal works, resistant to weathering

PROPERTIES

White, matte with high opacity and adhesion to mineral and organic surfaces, moisture resistant, environmentally friendly, vapor-permeable, UV-resistant, neutral odor. Resistant to atmospheric precipitation and temperature changes. Fire and explosion proof. Pigmented by water pigments.

APPLICATION

Designed for finishing the surface of building structures and elements inside and outside buildings. Outside buildings – on mineral grounds (concrete, brick, cement-sand plasters). Inside the premises – both on mineral and organic bases (wallpaper, plywood, fiberboard, particle board, gypsum board, plaster). The paint is also used to update the aesthetic properties of decorative plasters.

PREPARATION OF THE SURFACE

Preparation of the base is carried out, according to СНиП 3.04.01-87 and  ДБН В.2.6-22-2001. The substrate must be dry and strong, without visible damage. The old paint should be removed mechanically, the surface cleaned and treated with a primer. Friable unstable surfaces should be removed, if necessary, plastered and primed.

PERFORMANCE OF WORK

The paint before use should be mixed thoroughly. The paint is applied with a brush, roller or paint sprayer. Work should be carried out at base temperature not lower than +5 ° С and not higher than +30 ° С. If necessary, the paint can be diluted with clean water (no more than 10%). Under normal climatic conditions (temperature +20 ° C and relative humidity 60%), the drying time is 4 hours. During application, as well as drying, freshly painted surfaces must be protected from rain, strong wind and direct sunlight until completely dry. Immediately after use, the instruments should be rinsed thoroughly with water, if necessary, cleaned with an organic solvent.

EXPIRATION DATE

In original hermetic packaging and in cool conditions (not below +5 ° C and not above +30 ° C) 12 months from the date of manufacture indicated on the package. Avoid freezing.

PACKAGING

The paint is packed in plastic buckets of 7.5 and 15 kg.

UTILIZATION

Unused residues should be allowed to dry and disposed of with household rubbish.

TECHNICAL CHARACTERISTICS

Composition: mixture of pigments and fillers in aqueous polymer dispersions

Drying time, hour.: from 3 to 6

Appearance of the painted surface: matt milky white

Density :  about 1,5 kg / l

Application temperature :  from +5 °С to +30 °С

Consumption, kg / m2 : 0,15  – 0,25

CONVENIENT IN APPLICATION

RESISTANT TO WASHING

CONVENIENT IN APPLICATION

HIGH WHITENESS

GOOD ADHESION

VAPOR-PERMEABLE

ECONOMIC

ECOLOGICALY CLEAN

DOES NOT BURN

ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.