Primer – Concentrate № 16 for priming of mineral surfaces and light concretes inside and outside the premises
PERFORMANCE OF WORK
With the primer cover a dense, load-bearing, dry, hygroscopic bases, cleaned of impurities. Dilute the soil concentrate in a ratio of 1 to 6 with clean water and mix thoroughly by hand, or by drill with a nozzle at low speed. The resulting solution is applied by a paint brush with a uniform layer, a special product formula allows the surface to be treated in a single layer. Drying time of the dispersion on the basis of 4 hours, at a temperature of 20 ° C.
It is necessary to avoid getting the dispersion on the skin and mucous surfaces. It is advisable to work in rubber gloves. In case of dispersion on the skin or eyes, they must be thoroughly rinsed.
In a sealed container in a cool place for up to 12 months. Protect from frost.
Dispersion is packaged in 2, 5, 10 liters.
Composition: acryl-styrene dispersion
Color: milky white liquid
Density : 1040 kg/m3
Temperature of execution of works: from +10 to +30 °С
Consumption: from 0,1 to 0,2 l/m²
INCREASES ADHESION OF NEXT LAYERS
STRENGTHENS AND PROSPECTS THE FOUNDATION
|Foundation||Proportion of breeding, parts||Quantity of the mortar, liters||Coverage area, sq.m.|
|Weakly absorbing (concrete)||1:9||20||100|
|Normally absorbent (plaster, GKL)||1:8||18||90|
|Powder-absorbing (foam-aerated concrete)||1:6||
ТУ У В.2.7-24.3–30554583-004-2002
Hygienic conclusion of the Ministry of Health of Ukraine