The mixture is used as a masonry mortar for ceramic bricks.
PREPARATION OF THE SURFACE
The substrate should be cleaned of materials that reduce adhesion and moisture.
PERFORMANCE OF WORK
The dry mixture is poured into water and thoroughly mixed for 5 minutes mechanically until a uniform composition is obtained. After 5 minutes, repeat the mixing. The mortar mixture is evenly applied by a trowel or other tool to the surface. The surface of the material to be laid should be moistened, if necessary.
The mortar mixture is applied to the brick of the previous row, to the end of the next brick laid, the brick is placed in place of the masonry, its position is corrected, then the next brick is placed in the same order. The number of rows of masonry per shift depends on the quality of the material being stacked and is determined experimentally by the manufacturer of the work.
The time of use of the mortar mixture is not more than 90 minutes. The manufacturer is not responsible for the incorrect use of the material, nor for
Application of it for purposes and conditions not provided for in this manual.
The mixture contains cement, which, when mixed with water, forms an alkali. Work should be in rubber gloves. If the solution gets into the skin or eyes, rinse them with plenty of water, if necessary, consult a doctor.
In dry conditions and hermetic packaging the period of storage is at least 12 months from the date of manufacture.
The dry mix is packaged in bags of 25 kg.
Composition: cement mixture with mineral fillers and functional additives.
Mixture suitability time, min, not less than: 90
Compressive strength limit, MPa, not less than;
- For Mark 50: 5
- For Mark 75: 7,5
- For Mark 100: 10
Strength of adhesion to the base, MPa, not less than: 0,2
Water consumption, ml / kg, approx.: 160-180
LAYER THICKNESS 2 – 10 mm
Mixture “Artisan” C.1.MP1
DSTU B В.2.7-126: 2011
Hygienic conclusion of the Ministry of Health of Ukraine