Primer of deep penetration №6 for priming of mineral surfaces indoors
PREPARATION OF THE SURFACE
Preparation of the base is carried out, according to СНиП 3.04.01-87 and ДБН В.2.6-22-2001. The basis has to be dry, clean, without visible damage.
PERFORMANCE OF WORK
Primer is applied to the substrate with the help of brush, roller or spray. Fundamentals with a high absorption capacity, it is necessary to cover 2-3 times.
The manufacturer is not liable for improper use of the material, or for its use for purposes and conditions not provided for by the instruction.
It is necessary to observe safety precautions in the manufacture of construction works.
In a sealed container it is up to 12 months. Protect from frost.
The primer is packaged in cans of 2, 5, 10 liters.
Composition: aqueous polymer dispersion with special additives
Drying time: from 3 to 6 hours
Appearance: milky white liquid, transparent after drying
Density: around 1 kg/l
Working temperature: from +5 to +30°С
Consumption: from 0,1 to 0,4 l/m2
STRENGTHENS WEAKLY BASES
INCREASES ADHESION TO VARIETY BASIS
SIMPLIFIED PROCESS OF APPLICATION OF DECORATIVE PLASTER
HIGH COVERING ABILITY
TU U В.2.7-24.3–30554583-004-2002
Hygienic conclusion of the Ministry of Health of Ukraine