Protection against efflorescence №5

Protection against efflorescence №5 for the protection of mineral surfaces from contamination, fading, saline (efflorescence)


The composition is used to protect mineral surfaces from various types of contaminants, fading, salt deposits (efflorescence). It is applied to the material, absorbed into it by capillaries and forms a vapor-permeable, colorless, water-repellent film.

– Low molecular weight of oligomers ensures high penetrating ability;

– the structure of the molecules makes it possible to use it for building materials with a high content of alkali;

– provides a rapid manifestation of hydrophobic effect, due to which the treated surface quickly becomes resistant to the effects of atmospheric precipitation;

– increases frost resistance.


The surface must be dry. Pollution should be previously eliminated mechanically. In the presence of salts harmful to the construction, it is necessary to make a qualitative analysis of their content. Those areas that are supposed to be treated must have open pores. Surfaces that will not be treated (windows lacquered and intended for painting) must be protected. Materials sensitive to the solvent, such as insulation from polystyrene, mastic for seams, bitumen, latex, etc. do not have to contact the staff.


For different types of surfaces, use the table. Shake before use. Apply the material by spraying or brushing. Application is carried out evenly and to saturation for one or more working approaches. As a rule, it is enough to process the surface of a building material twice, while the washing should be applied by the method “wet to wet”. The highest efficiency is achieved with a well-absorbent surface. Clean tools immediately after use with removers of the 646-650 series.

All recommendations are effective at a temperature of + 20 ° C and a relative humidity of 60%.

The manufacturer is not responsible for improper use of the material, as well as its application in order and conditions not stipulated by the instruction.


Work should be done away from open sources of fire. Do not drink, smoke or eat while working. Mandatory use of protective glasses and gloves. In case of contact with the skin and eyes, rinse thoroughly with water and, if necessary, consult a doctor. Ensure good ventilation in enclosed spaces. Do not turn.

Keep away from open flame in accordance with fire safety regulations.


In hermetically sealed packaging 24 months.


Containers of 0.9 liters and 2.7 liters.


Composition: oligomeric siloxane with a long alkyd substituent.

Density : 0.78 g / cm3

Color :  slightly clear liquid

Application temperature :  from 0 °С to +40 °С


Concrete B25 : 150-200 ml / m2

Facing bricks :   150-250 ml / m2

Dry mix plasters : 200-250 ml / m2

Lime-sand plaster :  300-600 ml / m2

Asbestos cement (slate) : 150-200 ml / m2

Cellular concrete :  300-800 ml / m2

It is recommended to make control samples to assess the flow and efficiency of the material.



Material Solvent Proportion
High-quality concrete, artificial stone (cement-based), ceramics, marble, asbestos cement 646-650 1:1
Silicate and dense facing ceramic brick, mineral plasters, mineral paints 646-650 1:0,5
Cellular concrete, ceramic bricks of semi-dry pressing without dilution






ТУ У В.2.7-24.3–30554583-004-2002

Hygienic conclusion of the Ministry of Health of Ukraine.



There are no reviews yet.

Be the first to review “Protection against efflorescence №5”

Your email address will not be published. Required fields are marked *